You are troubleshooting a client problem with a 2.4 GHz WLAN connection. The client is experiencing surprisingly low data rates during the work day. You analyze the workspace outside of business hours and detect a strong signal with a typical noise floor at the client location. During working hours, the user works with a laptop in the area and uses an external USB hard drive for continuous data access. The user also states that the laptop works as expected on her home network. The user working approximately 8 feet away from this client experiences no problems.
Based on this information, what is the likely cause of the problem?
Correct Answer: D
The likely cause of the problem is thatthe external hard drive is USB 3.0 and is causing a significant increase in the noise floor when in use. USB 3.0 devices are known to generate radio frequency interference (RFI) in the 2.4 GHz band due to their high data transfer rates and harmonics. This RFI can increase the noise floor and degrade the signal-to-noise ratio (SNR) of WLAN devices operating in the same band. This can result in lower data rates, reduced throughput, increased retransmissions, and poor performance. The problem may not occur outside of business hours or on the user’s home network because of different usage patterns or environmental factors.Reference:[CWNP Certified Wireless Network Administrator Official Study Guide: Exam CWNA-109], page 527; [CWNA: Certified Wireless Network Administrator Official Study Guide: Exam CWNA-109], page 497.
The center frequency of channel 1 in the 2.4 GHz band is 2.412 GHz (2412 MHz). What is the center frequency of channel 4?
Correct Answer: A
The center frequency of channel 4 in the 2.4 GHz band is 2.427 GHz (2427 MHz). The center frequency of a channel is the midpoint of its frequency range, where the signal strength is highest and most concentrated. The center frequency of channel 1 in the 2.4 GHz band is 2.412 GHz (2412 MHz), as given in the question. The center frequency of each subsequent channel is obtained by adding 5 MHz to the previous channel’s center frequency, since the channels are spaced 5 MHz apart from each other in this band. Therefore, to find the center frequency of channel 4, we need to add 15 MHz (5 MHz x 3) to the center frequency of channel 1:
2.412 GHz + 0.015 GHz =2.427 GHz
Alternatively, we can use a formula to calculate the center frequency of any channel in the 2.4 GHz band:
Center frequency (GHz) =2.407 + (0.005 x Channel number)
Using this formula for channel 4, we get:
Center frequency (GHz) =2.407 + (0.005 x 4)
Center frequency (GHz) =2.407 + 0.02
Center frequency (GHz) =2.427Reference:1, Chapter 3, page 85;2, Section 3.2
You have implemented an 802.11ax WLAN for a customer. All APs are four stream HE APs. The customer states that it is essential that most of the clients can use the OFDMA modulation scheme. What do you tell the customer?
Correct Answer: A
OFDMA is a new modulation scheme introduced in 802.11ax that allows multiple users to share the same channel by dividing it into smaller subchannels called resource units (RUs). This improves the efficiency and capacity of the WLAN by reducing contention and overhead. However, to use OFDMA, both the AP and the client must support 802.11ax and negotiate the parameters of the subchannel allocation.Therefore, the customer needs to upgrade the clients that require OFDMA to 802.11ax devices12.
The other options are not correct because they do not reflect the reality of OFDMA.Option B is incorrect because OFDMA is a mandatory feature of 802.11ax for both downlink and uplink transmissions, and all 802.11ax APs must support it1. Option C is incorrect because OFDM and OFDMA are different modulation schemes, and OFDM does not allow multiple users to share the same channel.Option D is incorrect because 802.11ac devices cannot support OFDMA through driver upgrades, as they lack the hardware and firmware capabilities to do so2.
You are performing a post-implementation validation survey. What basic tool can be used to easily locate areas of high co-channel interference?
Correct Answer: D
A Wi-Fi scanner is a basic tool that can be used to easily locate areas of high co-channel interference. A Wi-Fi scanner is a software application that can run on a laptop, tablet, smartphone, or other device that has a Wi-Fi adapter. A Wi-Fi scanner can scan the wireless environment and display information about the detected access points and client stations, such as their SSID, BSSID, channel, signal strength, security, and data rate. A Wi-Fi scanner can also show the channel utilization and overlap of different access points, which can indicate the level of co-channel interference. Co-channel interference is a type of interference that occurs when multiple access points use the same or adjacent channels within the same coverage area. Co-channel interference can reduce the throughput and performance of the WLAN, as the access points and client stations have to contend for the channel access and avoid collisions. To identify areas of high co-channel interference, a Wi-Fi scanner can be used to measure the signal strength and channel utilization of different access points and compare them with a threshold or a baseline.Alternatively, a Wi-Fi scanner can also use a color-coded heat map to visualize the co-channel interference level in different locations.Reference:1, Chapter 7, page 279;2, Section 4.3
Prep2Certsis a premium service offering a comprehensive collection of exam questions and answers for over 1400 certification exams. It is regularly updated and designed to help users pass their certification exams confidently.
Please contact info@Prep2Certs.com and we will provide you with alternative payment options.
You can by Contacting our sales team.